Fitting The Harness - Stihl AR 900 Notice D'emploi

1
2
next to or behind your body – fit the
N
cable (1) in one of the lateral cable
ducts (2) and push it into place
1
2
in front of your body – fit the
N
cable (1) in one of the upper cable
ducts (2) and push it into place
Always use the cable outlets at the side
on which the power tool is held and
controlled.
WARNING
Never position the cable diagonally –
risk of accidents.
AR 900
If the cable is too long, attach it to
N
the retainer on the pouch.
2

Fitting the Harness

Adjusting the Harness Straps
A
A Pull the ends of the straps
downward to tighten the harness.
B Lift the tabs of the adjusters to
loosen the straps.
English
B
29