Description Of Device / Spare Parts - ATIKA VT 40 Z Notice Originale

 The connector of the connection cable must be splash-
proof.
 When running the connection line observe that it does not
interfere, is not squeezed, bended and the plug connection
does not get wet.
 Wind off completely the cable when using a cable drum.
 Do not drive the device across the extension cable.
Make sure that it is behind you in a secure position. Place
the cable on a path or area that has already been thatched.
 Do not use the cable for purposes for which it is not meant.
Protect the cable against heat, oil and sharp edges. Do not
use the cable to pull the plug from the socket.
 Protect yourself against electric shocks. Avoid touching
earthed parts with your body (e.g. pipes, heating apparatus,
cookers, fridges etc.).
 Regularly check the extension cables and replace them if
they are damaged.
 Do never connect a damaged cable to the mains. Do not
touch a damaged cable before it is disconnected from the
mains. A damaged cable may cause contact with live parts.
 Do not use any defective connection cables.
 When working outdoors, only use extension cables
especially approved and appropriately labelled for outdoor
use.
 Do not set up any provisional electrical connections.
 Never bypass protective devices or deactivate them.
 Only hook up the machine by means of a fault-current circuit
breaker (30 mA).
The electrical connection or repairs to electrical parts
of the machine must be carried out by a certified
electrician or one of our customer service points.
Local regulations – especially regarding protective
measures – must be observed.
Repairs to other parts of the machine must be carried
out by the manufacturer or one of his customer
service points.
Use only original spare parts, accessories and special
accessory parts. Accidents can arise for the user
through the use of other spare parts. The
manufacturer is not liable for any damage or injury
resulting from such action.
22
D e s c r i p t i o n o f d
D e s c r i p t i o n o f d
Pos. Denomination
Handle hoop with switch-connector
1
combination
2 Switch-plug unit (VDE)
2 Switch-plug unit (CH)
3 Cable strain relief
4 Cable bracket
5 Connecting bar
6 Star grip M 6
7 Screw M6 x 45
8 Hoop holder LH
9 Hoop holer RH
10 Fixing cup cpl.
11 Holder LH
12 Holder RH
13 Screw M 6 x 30
14 Motor cover
15 Motor complete 1600 W
16 Bearing 6000
17 Belt pulley
18 Snap ring Ø 24 mm
19 Bearing 61805 Z
20 Belt pulley
21 Belt (18 mm)
22 Height adjustment switch
Work depth setting left complete
23
24 Running wheel Ø 180
25 Wheel cover Ø 30 mm
27 Wheel suspension RH
28 Running wheel Ø 145 mm
Scarifier drum complete with
29
blades
30 Blade set (22 blades)
Aerator drum complete with springs
31
(optional accessory, if applicable)
32 Drive opening
33 Bearing holder
Pan head screw M 5 x 35
34
Housing
35
Impact guard
36
Spring
37
Fastening bolt 26 mm
38
Fastening bolt 65 mm
39
Grass catching bag
40
(optional accessory, if applicable)
Safety label
41
Hexagon spanner
42
e v i c e / s p a r e p a r t s
e v i c e / s p a r e p a r t s
Order.-No.
381632
381633
381634
381635
380953
381636
381637
381638
381639
381640
381641
381642
381643
390162
381644
381645
381646
381647
381610
381611
381648
381649
381650
381651
381652
381620
381654
381655
381656
381657
381658
381659
381660
381661
380972
381623
380971
381662
380975
380999