Description Of The Device / Spare Parts; Mulch Insert; Assembly; Before Starting - ATIKA RMC 40-400 Notice Originale

 Be especially careful when turning the lawn mower or
pulling it towards you.
 While the motor is running, do not
 lift or carry the device about
 lift the impact guard
 Make sure that the impact guard is closed or the collecting
bag is attached.
Use only original spare parts and accessories parts.
Accidents can arise for the user through the use of
other spare parts. The manufacturer is not liable for
any damage or injury resulting from such action.
Do not carry out repair operations on the machine
other than those described in section "Maintenance
and cleaning" but contact the manufacturer or
authorized customer service centres.

Refer to the respective operating instructions for notes on
the safety of the battery and the charger.
Description of device / spare parts
+
Pos. Denomination
Lower handle hoop
1
Upper handle hoop
2
Switch handle
3
Machine knob nut M8
4
Cutting height adjustment
5
Battery compartment
6
Safety knob
7
Impact guard
8
Cup holder
9
Grass catching bag
10

Mulch insert

11
12A Battery AP 40-2000 (2000 mA)
12C Battery AP 40-4000 (4000 mA)
Charging unit ALG 40-1800
13
Cutting blade
14
Safety label
15
Safety key
16
Plastic clamping plate
17
Clamping plate
18
Nut M10 x 1,25
19
Cable bracket (not illustrated)
20
Screw St 4 x 15
21
Running wheel 6'' (Ø 152,4 mm)
22
23 Wheel cover 6''
Running wheel 8'' (Ø 203,2 mm)
24
25 Wheel cover 8''
Battery compartment cover
26
16
 To achieve perfect function of the machine, follow the
notes given in these instructions
Cup holder
Handle hoop
Grass catching bag
Order-no.




365632




Mulch insert
365607
365610
365608
365609
365501
365503
365500

365618
363606
365622
365619
365620
365621 Charging the rechargeable battery
365617


365613
365614
365615
365616


Assembly

Fasten the cup holder (9) with 4 screws M 4 x 15 on the
upper handlebar (2).
Fasten the lower handlebar (1) with the screws M 8 x 15
and nuts M 8 on both brackets.
Now fasten the upper handlebar (2) with the screws M 8
x 45 and the star knob nuts (4) on the lower handlebar
(1).
You may fold the handlebar to save space. Loosen the
star knob nuts (4) for this purpose and fold the upper
handlebar down.
Pull the impact guard (8) up and hold it.
Hook the collecting bag (10) with the hooks into the
holders on the housing (A).
Make sure the discharge opening is clean and does not
contain any deposits.
The mulch insert must not be attached when working
with the collecting bag.
Pull the impact guard (8) up and hold it.
Insert the mulch insert. Slide the mulch insert into the
opening until the latch engages audibly.
To remove the mulch insert, first press out the notch,
then you can remove the mulch insert.
The mulch insert must not be attached when working
with the collecting bag.

Before starting

The lithium ion batteries and charger are not part of
the scope of delivery and must be purchased
separately. (See "Scope of delivery")
Use genuine batteries only.
Do not use any other charger to charge the
batteries. The charger is optimally matched to the
batteries. Using an unsuitable charger may present
a risk of shock, overheating or escape of caustic
battery fluid.