Specifications; General Specifications - Yamaha MT50 Manuel De L'utilisateur

Specifications
General Specifications
Tape Type
Track Format
Head System
Tape Transport Motor
Tape Speed
Pitch Control
Wow & Flutter
Rewind Time
Frequency Response
S/N Ratio
Mixer Specs
EQ
Frequency Response
S/N Ratio (@3% THD)
Recorder Specs Distortion
Erasure Ratio
Noise Reduction
MIC/LINE
AUX RETURN L/R
Connections
STEREO OUT L/R
AUX SEND
MONITOR OUT L/R
SYNC OUT
PHONES (stereo)
Power Supply
Dimensions (W × H × D)
General
Weight
Option
0 dB = 0.775 V rms
* dbx noise reduction system was manufactured based on a patent license from THAT Corporation.
dbx is a trademark of Carillon Electronics Corporation.
All specifications subject to change without notice.
C46–90 cassette (Type II High Bias 70 µs EQ)
4 tracks
4-channel record/playback (hard permalloy head)
4-channel erase (ferrite head)
DC servo
9.5 cm/sec
±10%
0.12% W. RMS
C60 tape → Approx.120 seconds
MIC IN to STEREO OUT, LINE IN to STEREO OUT, LINE IN to PHONES
OUT: 20 Hz–20 kHz +1, –4 dB
MIC IN to STEREO OUT: 68 dB, IHF-A (GAIN: MIC)
LINE IN to STEREO OUT: 70 dB, IHF-A (GAIN: LINE)
LOW: ±12 dB, 80 Hz, shelving
HIGH: ±12 dB, 12 kHz, shelving
40 Hz–16 kHz +3, –5 dB (dbx* OFF)
85 dB (dbx* ON, IHF-A)
1.5% (400 Hz, –10 dB recording level)
55 dB (1 kHz, 0 dB recording level, dbx* OFF)
dbx*
Input impedance: 10k Ω
Nominal input level: –10, –30, –50 dB (fader nominal)
Min. input level: –56 dB (gain control MIC, fader max)
Max. input level: +6 dB (gain control LINE, fader nominal)
Input impedance: 10k Ω
Nominal input level: –10 dB (AUX RETURN control nominal)
Min. input level: –16 dB (AUX RETURN control max)
Output impedance: 1k Ω
Nominal load impedance: 10k Ω
Nominal output level: –10 dB (10k Ω load)
Nominal load impedance: 8–40 Ω
Max. output level: 30mW (40 Ω load)
AC adaptor (PA-1206)
337 × 69.3 × 231 mm
1.7 kg
FC5 Footswitch for punch-in/out recording
29
Specifications
MT50 User's Guide