Makita LS0714 Manuel D'instructions page 2

ENGLISH (Original instructions)
SPECIFICATIONS
Models
Blade diameter
Hole (arbor) diameter
Max. kerf thickness of the saw blade
Max. Miter angle
Max. Bevel angle
No load speed (RPM)
Dimensions (L x W x H)
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s). The lightest and heaviest combination, according to
EPTA-Procedure 01/2014, are shown in the table.
Max. Cutting capacities (H x W) with blade 190 mm (7-1/2") in diameter.
45° (left and right)
(Note)
* mark indicates that a wood facing with the following thickness is used.
1: When using a wood facing 20 mm (13/16") thick.
2: When using a wood facing 15 mm (9/16") thick.
3: When using a wood facing 10 mm (3/8") thick.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Miter angle
0°
57° (right)
670 mm x 430 mm x 458 mm (26 - 3/8" x 17" x 18")
12.5 - 14.2 kg (27.5 - 31.4 lbs)
45° (left)
* 45 mm x 265 mm
Note1
(1 - 3/4" x 10 - 3/8") (2 - 3/8" x 10 - 3/8")
40 mm x 300 mm
(1 - 9/16" x 11 - 3/4") (2 - 1/16" x 11 - 3/4")
* 45 mm x 185 mm
Note2
(1 - 3/4" x 7 - 1/4")
40 mm x 212 mm
(1 - 9/16" x 8 - 3/8") (2 - 1/16" x 8 - 3/8")
-----
(2 - 1/16" x 6 - 3/8")
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or BATTERY-
operated (cordless) power tool.
Work area safety
Keep work area clean and well lit. Cluttered or
1.
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2 ENGLISH
LS0714
190 mm (7-1/2")
15.88 mm (5/8")
2.2 mm (3/32")
Left 47° , Right 57°
Left 45°, Right 5°
6,400 /min.
Bevel angle
0°
* 60 mm x 265 mm
Note 1
52 mm x 300 mm 40 mm x 300 mm
(1 - 9/16" x 11 - 3/4")
* 60 mm x 185 mm
Note 2
(2 - 3/8" x 7 - 1/4")
52 mm x 212 mm
* 60 mm x 145 mm
Note 3
(2 - 3/8" x 5 - 3/4")
52 mm x 163 mm
5° (right)
-----
-----
-----