GUTMANN Horizon Notice D'utilisation page 19

The extractor hood is produced of stainless
steel in combination with glass.
1
4
5
1 Upper chimney (circular air)
2 Lower chimney
3 Hood body
4 Switch panel
5 Metal grease filter
6 Safety glass
7 Filter element
Product description
Switch Panel
The switch panel consists of seven key
buttons (some models have only five buttons
that is w/o automatic follow up and w/o filter
display).
Power of the supercharger
The first four buttons controll the power of
the supercharger.
Button „1" = low performance of the
supercharger
Button „2" = middle performance of the
supercharger
2
3
6
7
Button „3" = high performance of the
supercharger
Button „Int" = intensive level
Press any button to switch on the extractor
hood. The hood is switched off by pressing
the backlighted keys once more. The
extractor hood automatically switches back
after 3 min. from the intensive level to level 3
(high performance of the supercharger).
Automatic Cool Down Period
The automatic cool down period is activated
by pressing the button with the clock symbol.
The exhaust hood will progressively switch
from level 3 down to level 1 and run at that
level for approximately 15 minutes before
turning off.
Lighting
Please press the lighting button. The lighting
of the extractor hood switches on. The lighting
switches off by pressing the key button once
more.
Clean Grease Filter Alert
When the clean grease filter alert lights up
(right button), the filter must be cleaned. Af-
ter cleaning the filter, press and hold the right
button (3) for at least 5 seconds. The alert
light will turn off. The clean grease filter alert
will be activated after a maximum of 15
operating hours or 14 days (even if nothing
has been cooked).
Cleaning and care
Cleaning of the surface
Risk of electric shock! Please separate the
extractor hood from the power supply network
by pulling the plug or the disconnection of
the fuse. Please pay attention to the fact that
no water seeps into the appliance during the
cleaning process.
en