ATIKA KS 1800/35 Mode D'emploi page 19

Contents
Extent of delivery
EC Declaration of Conformity
Operating times
Symbols on the chain saw
Symbols operating instructions
Proper use
Residual risks
Safety instructions
− General safety instructions
− Work area safety
− Electrical safety
− Safety of persons
− Power tool use and care
− Service
− Chain saw safety warnings
− Causes and operator prevention of kickback
Vibrations
Assembly
Before the first starting
− Chain lubrication
− Charging the oil tank
Start-up
− Before sawing
− Electric supply
− Mounting of the extension cable
− Switching On/Off
− Chain brake
− Checking the chain brake
− Clamping of saw chain
Work instructions (saw techniques)
− Operating
− Additional advices for sawing trunks
− Additional advices for sawing timber under
tension/release
− Additional advices for chopping down trees
Maintenance and cleaning
− Maintenance
− Sharpening of saw chain
− Exchanging saw chain and guide bar
− Chain wheel
− Checking of the oil automatic
− Cleaning
Transport
Storage
Possible faults
Technical specifications
Description of device / spare parts
Guarantee
Extent of delivery
After unpacking, check the contents of the box for
19
19
completeness
19
possible transport damage.
20
Report any damage or missing items to your dealer, supplier or
20
the manufacturer immediately. Complaints made at a later date
20
will not be acknowledged.
20
• 1 Chain saw
20
• 1 Guide bar
20
• 1 Saw chain
21
• 1 Chain protection
21 • 1 Operating instructions
• 1 Warranty declaration
21
21
21
EC Declaration of Conformity
21
No. (S-No.): 14624
22
23
according to EC directive:
2006/42/EC
24
24
We,
24
ATIKA GmbH
24
Josef-Drexler-Str. 8 – 89331 Burgau – Germany
24
declare under our sole responsibility, that the products
24
Kettensäge (Chain saw) KS 1800/35
24
Serial number: 000001 - 020000
25
are conform with the above mentioned EC directives as well as
25
with the provisions of the guidelines below:
25
2004/108/EC, 2000/14/EC and 2011/65/EU.
25
Conformity assessment procedures 2000/14/EC -
25
Appendix V:
25
Measured sound power level L
25
Guaranteed sound power level L
26
Following harmonized standards have been applied:
26
EN 60745-1:2009+A1, EN 60745-2-13:2009+A1,
EN 55014-1:2006+A1+A2, EN 55014-2:1997+A1+A2,
26
EN 61000-3-2:2006+A1+A2, EN 61000-3-11:2000
27
27
Duly authorised person for the complilation of technical
documents:
27
ATIKA GmbH – Technical department
27
Josef-Drexler-Str. 8 – 89331 Burgau – Germany
27
28 EC type examination carried out by:
TÜV Rheinland Product Safety GmbH
28
Certificate no.: BM 50296971
28
28
28
Burgau, 06.11.2014
29
29
29
Operating times
Please observe as well the regional regulations for noise
protection.
104,72 dB (A).
WA
107 dB (A).
WA
i.A.
i.A. G. Koppenstein
Engineering design management
19