Peg-Perego Primo Viaggio Adapter/Links Notice D'emploi page 7

- The product must be
assembled by adults.
- Do not use if any parts are
missing or broken.
Instructions for use
1 Fasten Primo Viaggio Adapter/Links - Uppa
Baby Strollers to the car seat as shown in the
figure.
2 Fasten them beneath the car seat handlebar,
as show. Insert them into the appropriate slots
until you hear them click.
3 You can be sure they are properly fastened
when the green indicator shows.
If the indicator is red, refasten until you hear
them click.
Ensure the adaptors point in the right direction.
4 The car seat can be fastened onto the chassis
either rear- or forward-facing.
Position it on the chassis and press on the
product with both hands until it clicks into
place.
Check that the child seat is properly fastened.
5 To release the car seat from the chassis:
simultaneously pull the adapter buttons on
both sides so as to release the car seat from
the chassis, then take a hold of the handlebar
and lift it.
The Primo Viaggio Adapter/Links - Uppa Baby
Strollers adapters can remain attached to the
car seat also when it is used in a vehicle; there
is no need to remove them.
6 When using the base, fasten the car seat until
it clicks into place.
7 When not using the base, ensure the seat belt
fits tightly around the body of the car seat, and
pass it under the adapters.
8 To release the Primo Viaggio Adapter/Links -
Uppa Baby Strollers adapters from the car seat:
press the red button located inside the
seat (close to the hood fastener) and
simultaneously remove as shown.
Repeat on both sides to release both adapters.
9 OPTION: it is possible to convert the single
passenger chassis into a twin by using specific
adaptors provided by the chassis manufacturer
in conjunction with Primo Viaggio Adapter/
Links-Uppababy Strollers
PegPerego S.p.A.
PegPerego SpA adopts a quality management
system certified by TÜV Italia Srl in accordance
with the ISO 9001 standard. PegPerego can
make changes at any time to the models
described in this publication for technical or
commercial reasons.
PegPerego after-sales service
If any parts of the item get lost or damaged,
only use genuine PegPerego spare parts. For
any repairs, replacements, information on the
products and sales of genuine spare parts and
accessories, contact the PegPerego Assistance
Service and state the serial number of the
product.
tel. 0039/039/60.88.213
e-mail assistenza@pegperego.com
website www.pegperego.com
All intellectual property rights on the contents
of this manual are property of PegPerego S.p.A.
and are protected by the laws in force.
7