Resetting The Scale; Cleaning; Fault/Remedy - ADE Julia Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32

Resetting the scale

Reset the scale to its default settings if unusual or obviously incorrect values are shown
on the display.
1. Remove the batteries from the battery compartment and wait a moment.
2. Reinsert the batteries.
Pay attention to the correct polarity of the batteries (+/-).
After switching on the scale, you can start weighing as usual.

Cleaning

NOTE on material damage
− Do not immerse the scale in water or other liquids.
− Do not under any circumstances use harsh, scouring or abrasive
cleaning agents or the like to clean the scale. Otherwise, the surface
could be scratched.
The scale should be cleaned immediately after use, especially after its contact with fat,
spices, vinegar, and other strongly flavoured and/or coloured foodstuffs.
− Wipe the scale as needed with a slightly damp soft cloth. Avoid contact with citric
acid.

Fault/Remedy

Fault
No function
The scale appears to be displaying
wrong weighing results
"Err" is shown on the display
"Lo" is shown on the display
Kitchen scales KE 1823
Possible cause
‚ Are the batteries empty or inserted the
wrong way around?
‚ Is the scale located on a firm, even surface?
‚ Is a device that can cause electromagnetic
disturbances located in the vicinity of the
scale?
‚ Remove the batteries from the scale and
wait a moment. Reinsert the batteries.
‚ The maximum capacity of the scale (5 kg)
has been exceeded.
‚ The batteries are empty (see "Inserting/
changing batteries").
Resetting the scale
19

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ke 1823

Table des Matières