Quick CHC 1102 M Manuel De L'utilisateur page 17

SETTING THE CHAIN COUNTER
The chain counter has a several functions that can be personalized to satisfy user's
requirements.
To go to the setting menu, press and release key
start to flash after the button has been pressed)for more than 3 seconds.
As soon as the key is released a window similar to the one shown below is displayed:
and q(UP and DOWN) to select the data items within the menu.
p
Use keys
The data item that has been currently selected appears in reverse.
=
Use key (SELECT) to confirm the selected data item.
The following data items are provided on the settings menu, with the MASTER chain
counter present on the network:
SYNTHETIC DESCRIPTION
DATA ITEM
Reset the measure of chain lowered.
COUNTER RESET
Automatic down and up alarm setting.
FUNCTIONS
Chain counter personalization: contrast, back-lighting, light delay, key beep, timed locking of the
PERSONAL SET
DOWN) keys.
DATE AND TIME
System date and time setting.
LANGUAGE
Language used for system messages.
Chain counter calibration: setting of the measurement unit, of the number of magnets installed, of the gypsy lap on
CALIBRATION
the gypsy and management of the windlass with free fall.
Automatic chain counter calibration.
AUTO CALIBRATE
Various chain counter controls.
UTILITY
MASTER/SLAVE setting if more than one chain counter is used.
CAN CONFIG
Chain counter set-up menu exit.
EXIT
The structure
of the menus:
CHC1102M GB F - REV005B
SETTING THE CHAIN COUNTER
=
(SELECT) (the monitoring line will
COUNTER RESET
FUNCTIONS
PERSONAL SET
DATE AND TIME
LANGUAGE
CALIBRATION
AUTO CALIBRATE
UTILITY
CAN CONFIG
EXIT
UP ALARM
AUTO DOWN
CONTRAST
LIGHT
LIGHT DELAY
KEY BEEP
LOCKED KEYS
ENGLISH
ITALIANO
FRANCAIS
DEUTSCH
ESPANOL
SET MEASURE
GYPSY LAP
MAGNETS NUMBER
FREE FALL
SENSOR TEST
LCD TEST
CLOCK BATTERY
SW VERSION
SET DEFAULT
CHECK FLASH
CHECK EEPROM
CAN MESSAGE
GB
SETTINGS
COUNTER RESET
FUNCTIONS
PERSONAL SET
DATE AND TIME
LANGUAGE
CALIBRATION
p q
and (UP and
17