Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CHAIN COUNTER OPERATION
GB
WINCH MODE
This mode must be used when carrying out winch operations with the windlass. In this configuration the
mechanism that moves the chain (gypsy) remains stationary while the drum can still turn.
To use the windlass for winch operations consult relative user manual.
ATTENTION: use this mode only if the windlass is configured for winch operations.
ATTENTION: in this mode the automatic down function is blocked, the up alarm function is
deactivated and the count is not updated.
Once activated the winch mode, the following window is displayed:
STOP
WINCH
To select direction of drum rotation press the
operation is complete, then release the button.
p
q
While
(UP) or
(DOWN) button is pressed, the instrument will display a window like this:
ACTIVATED
WINCH
If the instrument is turned off in winch mode, when turned on again it will display the last type of
information selected (date and time, instrument power supply voltage or speed of chain movement).
16
p
q
(UP) or
(DOWN) button. Hold the button down until the
CHC1102M GB F - REV005B
Publicité
Table des Matières
