Riello RG5D Instructions Pour L'installation, L'utilisation Et L'entretien page 48

FAULTS
Burner starts with an
ignition delay.
WARNING
The manufacturer cannot accept responsibility for any damage to persons, animals or property due to error
in installation or in the burner adjustment, or due to improper or unreasonable use or non observance of the
technical instruction enclosed with the burner, or due to the intervention of unqualified personnel.
2194
POSSIBLE CAUSES
The ignition electrodes are wrongly
positioned.
Air output is too high.
Nozzle dirty or worn.
Adjust them according to the
instructions of this manual.
Set the air output according to the
instructions of this manual.
Replace it.
10 GB
SOLUTION