Key Combinations - Abus HDCC81000 Manuel Utilisateur

7. Key combinations

This high-speed motorised dome supports three control protocols: Pelco D, Pelco P.
These protocols are supported by many recorders (such as HDCC9XXXX) and controllers,
allowing them to control the high-speed motorised dome.
The factory setting of the camera is Pelco D/P (automatic detection) with 2400 bps (bits per
second) set. The following information explains how to control the camera using the control
panel TVAC26000. Operation with other control units that use the Pelco D/P protocol is
possible, but the keys may have different names.
Preset
33
34
35
36
37
38
39
40
41
42
43
44
92
93
94
95
96
Function
Auto Flip
Pan Zero
Tour 1
Tour 2
Tour 3
Tour 4
IR cut filter On
IR cut filter Off
Pattern 1
Pattern 2
Pattern 3
Pattern 4
Turn on the limit
settings
Set the limit settings
Reboot
OSD menu
Stop scan
97 Start random scan
98 Start image scan
99 Start pan scan
100 Start tilt scan
101 Start panorama scan
102 Tour 5
103 Tour 6
104 Tour 7
105 Tour 8
29