Setting The Dynamic Soundstage Organizer; Dso; Selecting The Display Mode And Display Image - Sony CDX-M8805X Mode D'emploi

Masquer les pouces Voir aussi pour CDX-M8805X:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Setting the Dynamic
Soundstage Organizer (DSO)
If your speakers are installed into the lower part
of the doors, the sound will come from below
and may not be clear.
The DSO (Dynamic Soundstage Organizer)
function creates a more ambient sound as if there
were speakers in the dashboard (virtual
speakers).
You can store the DSO setting for each source.
*3
*3
*2
*2
*1
*1
*4

*1 DSO 1

*2 DSO 2
*3 DSO 3
*4 DSO OFF
1
Press (SOURCE) to select a desired
source.
2
Press (DSO) to select "1, 2, 3" or
"OFF."
To cancel the DSO mode, select "OFF."
After 3 seconds, the display returns to the
normal play mode.
Notes
• Depending on the type of car interior or type of
music, DSO may not have a desirable effect.
• If FM broadcasts are difficult to hear, set DSO to
"OFF."
Selecting the display mode
and display image
You can select from 3 different display modes.
You can also select various display images in
Wallpaper mode (1-5), Spectrum analyzer mode
(1-6) and Movie mode (1-3).
Note
The default setting of Auto Image mode is "A.IMG-All."
After a few seconds of releasing (IMAGE) on the unit,
the unit returns to Auto Image mode. If you want to
display a display image, set to "A.IMG-off" (page 24).
Selecting the display image
*4
1
2
To cancel this mode, select normal play mode.
Press (SOURCE) to select a desired
source.
Press (IMAGE) on the unit repeatedly
to select the desired display image.
Example: Wallpaper mode
Each time you press (IMAGE) on the unit, the
display image changes as follows:
Wallpaper mode 1-5 t
Spectrum analyzer mode 1-6 t
Movie mode 1-3 t
normal play mode
continue to next page t
23

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cdx-m8800

Table des Matières