Setting The Equalizer (Eq7) - Sony CDX-M8805X Mode D'emploi

Masquer les pouces Voir aussi pour CDX-M8805X:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Setting the equalizer (EQ7)

You can select an equalizer curve for 7 music
types (Xplod, VOCAL, CLUB, JAZZ,
NEWAGE, ROCK, CUSTOM), and OFF
(equalizer off).
You can store and adjust the equalizer settings
for frequency and level.
You can store the EQ7 setting for each source.
Selecting the equalizer curve
1
Press (SOURCE) to select a desired
source.
2
Press (EQ7) repeatedly to select a
desired equalizer curve.
Each time you press (EQ7), the item
changes.
To cancel the equalizing effect, select "OFF."
After 3 seconds, the display returns to the
normal play mode.
22
Adjusting the equalizer curve
1
Press (MENU).
2
Press M or m repeatedly until "EQ7
Tune" appears, then press (ENTER).
3
Press < or , to select the desired
equalizer curve, then press (ENTER).
Each time you press < or ,, the item
changes.
4
Select the desired frequency and level.
1 Press < or , to select the desired
frequency.
Each time you press < or ,, the
frequency changes as follows:
62Hz y 157Hz y 396Hz y 1.0kHz
y 2.5kHz y 6.3kHz y 16kHz
2 Press M or m to adjust the desired
volume level.
The volume level is adjustable by 1 dB
steps from –10 dB to +10 dB.
To restore the factory-set equalizer curve,
press (ENTER) for 2 seconds.
5
Press (ENTER).
After the effect setting is complete, the
display returns to the normal play mode.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cdx-m8800

Table des Matières