Geberit AquaClean Tuma Comfort Instructions De Montage page 32

EN
Re-assigning the remote control
If the device cannot be controlled using the remote
control, then the remote control must be re-assigned.
4
Simultaneously press the <+> button on the
remote control and the <+> button on the
lateral control panel for around ten seconds.
Result
ü The device beeps (1x).
ü The LED on the lateral control panel lights up
blue for several seconds.
32
Testing the remote control
Prerequisite
– The remote control has been set up.
– A hand is placed flat on the marked position of
the WC seat.
– The LED on the lateral control panel lights up
blue and the odour extraction unit runs. A user is
detected.
1
Press the <Shower> button briefly in order
to start the anal shower with oscillating
function.
ü The device performs a shower cycle.
A shower cycle ends after 50 seconds. If
required, restart the shower cycle.
36028798881172363-1 © 05-2017
967.304.00.0 (01)