Geberit AquaClean Tuma Comfort Instructions De Montage page 29

Simulating a user
For the following test steps, contact must
be maintained with the WC seat as shown
in order to simulate a user.
• The LED on the lateral control panel will
light up blue.
4
Simulate a user. Place a hand flat on the
marked position and leave it lying flat.
ü The LED on the lateral control panel
lights up blue and the odour extraction
unit runs. A user is detected.
ü The WC seat heating starts.
The odour extraction unit stops and the
LED goes out if no hand is detected on the
WC seat.
• Economy mode is active.
36028798881172363-1 © 05-2017
967.304.00.0 (01)
Testing the WC seat heating
Prerequisite
– A hand is placed flat on the marked position of
the WC seat.
– The LED on the lateral control panel lights up
blue and the odour extraction unit runs. A user is
detected.
4
Test the WC seat heating.
Result
ü After a few seconds of warm-up time, the WC
seat is evenly and noticeably warmed.
EN
29