LaserLiner CenterScanner Plus Mode D'emploi page 13

Technical data
(Technical revisions reserved. 10.17)
CenterScanner Plus RECV
Indicators
LED display
Measuring depth
Accuracy
Operating time
Operating conditions
Storage conditions
Radio module operating data
Power supply
Dimensions (W x H x D)
Weight (incl. batteries)
CenterScanner Plus TX
Indicators
Operating time
Operating conditions
Storage conditions
Radio module operating data
Power supply
Dimensions (W x H x D)
Weight (incl. batteries)
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must be collected
separately for disposal according to the European
Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at:
http://laserliner.com/info?an=cescapl
CenterScanner Plus
13 LEDs, acoustic warning signal
3 x 7 segment
Positioning: 2 - 150 cm wall thickness
Depth display: 2 - 200 cm drilling depth
Typically 3% of measured depth
approx. 20 h
-30°C ... 40°C, Max. humidity 85% rH, no condensation,
Max. working altitude 2000 m above sea level
-20°C ... 60°C, Max. humidity 85% rH
Frequency band 1: ISM band 433.95 MHz
Bandwidth: 0.05 MHz
Receiver category: 3
3x 1.5 V alkaline battery (type AAA)
75 x 172 x 28 mm
210 g
11 LEDs, acoustic warning signal
approx. 12 h
-20°C ... 40°C, Max. humidity 85% rH, no condensation,
Max. working altitude 2000 m above sea level
-20°C ... 60°C, Max. humidity 85% rH
Frequency band 1: ISM band 433.95 MHz
Transmit power: < -13 dBmW
Bandwidth: 0.05 Mhz
3x 1.5 V alkaline battery (type AAA)
75 x 172 x 28 mm
200 g
13
EN