Settings - Renkforce CD-7516 Notice D'emploi

Settings

Time
• Press and hold the MENU button (2) for approx. 2 seconds.
• Turn the VOLUME dial (3), until CLOCK is displayed.
• Briefly press the MENU button (2) again.
• The time is shown and the hour display blinks.
• Set the hours with the VOLUME dial (3).
• Briefly press the MENU button (2).
• The minute display blinks.
• Set the minutes with the VOLUME dial (3).
• Briefly press the MENU button (2). The setting is stored.
• Press DOWN (11) to exit the menu again.
Sound
• Press and hold the MENU button (2) for approx. 2 seconds.
• Turn the VOLUME dial (3), until AUDIO is displayed.
• Briefly press the MENU button (2) again.
• The following menu items can be selected with the MENU button (2) and set with the VOLUME dial (3) as
previously described.
BASS for setting the bass sound
TREBLE for setting the higher tone sound
FADER for setting the speaker volume balance between front and back speakers
BALANCE for setting the speaker volume balance between right and left speakers
EQUALIZER for selecting a sound presetting
LOUDNESS to increase the high and low tones when listening to quiet music.
BEEP for activating/deactivating the button confirmation sound
• To jump back one level in the menu, press the DOWN (11) button.
53