Sleep Mode - VDO MC 2.0 WR Manuel D'installation Et D'utilisation

ALTI DOWN--ALTI DOWN 1 or 2 is shown on the
display.
Press ALTI A
Press in confirmation.
M
ALTI DOWN 1--SET METER or FEET appears on the display.
The first digit of the altitude reading flashes.
Press ALTI A to reduce the value or
Once you have set the correct value, press
The second digit flashes.
Press ALTI A to reduce the value or
Once you have set the correct value, press
Continue the setting process until all digits have been set.

7. Sleep mode

The MC 2.0 has a sleep mode to save the battery.
The MC 2.0 goes into sleep mode after five minutes
if no speed signals are received.
SLEEP MODE appears on the display.
or P to make a selection.
P to increase it.
M to confirm your setting.
P to increase it.
M to confirm your setting.
ALTI DOWN 1--SET OK?
Press M in confirmation.
The MC 2.0 confirms by displaying ALTI DOWN 1--SET DONE.
To exit settings mode, press and hold the
SETTINGS--CLOSE? flashes. The MC 2.0 switches back to function mode.
Pressing any button or continue the ride will wake up the MC 2.0 WR.
www.vdocyclecomputing.com
PL NL ES IT FR
C button for three seconds.
MC 2.0 WR
ENG DE
61