Setting The Start Altitude/Home Altitude - VDO MC 2.0 WR Manuel D'installation Et D'utilisation

6.8 Setting the start altitude/home altitude

You can enter two different start altitudes in the MC 2.0. One start
altitude can, for example, be your home start altitude. The second
start altitude can, for example, be the start altitude of a holiday
location. Before starting each trip, you can use the start altitude to
quickly and easily re-calibrate the current air pressure in line with the
start altitude set.
Topic: re-calibration
The MC 2.0 measures the altitude using the air pressure. The
air pressure changes depending on the weather. The changed
air pressure leads to an incorrect altitude reading. Through
recalibration, the currently measured air pressure is calculated
back to the set start altitude.
Process:
Press and hold M for three seconds. SETTINGS--OPEN? flashes.
LANGUAGE---SELECT---appears on the display.
Press P to scroll to HOME ALTI---SET---.
Press M in confirmation.
HOME ALTI--HOME ALTI 1 or HOME ALTI 2 appears
on the display.
Press ALTI
Press M in confirmation.
HOME ALTI 1--SET METER or SET FEET appears on
the display. The meter or feet number flashes.
Press ALTI
it. Once you have set the correct value, press
confirm your setting.
HOME ALTI 1--SET OK?
Press M in confirmation.
The MC 2.0 confirms by displaying HOME ALTI 1--SET DONE.
To exit settings mode, press and hold the
SETTINGS--CLOSE? flashes. The MC 2.0 switches back to function mode.
www.vdocyclecomputing.com
PL NL ES IT FR
A or P to make a selection.
A to reduce the value or P to increase
C button for three seconds.
MC 2.0 WR
ENG DE
M to
57