Setting The Navigator - VDO MC 2.0 WR Manuel D'installation Et D'utilisation

6.6 Setting the navigator

The navigator is directly set from the function menu.
Process:
NAVIGATOR---SET--- is shown on the display.
Press in confirmation.
M
NAVIGATOR––FORWARD or BACKWARD appears on
the display.
Press ALTI A
Press M in confirmation.
NAVIGATOR--SET DISTANCE appears on the display.
The distance in KM or MILES flashes.
The first digit flashes.
Press ALTI A
it. Once you have set the correct value, press
confirm your setting.
or P to make a selection.
to reduce the value or P to increase
The second digit now flashes.
Press ALTI to reduce the value or
A
set the correct value, press
Continue the setting process until all digits have been set.
NAVIGATOR––SET OK? query
Press
The MC 2.0 confirms by displaying NAVIGATOR--SET DONE. Once the
setting is complete, the MC 2.0 automatically switches back to
function mode.
M to
www.vdocyclecomputing.com
PL NL ES IT
to increase it. Once you have
P
M to confirm your setting.
M in confirmation.
FR ENG DE
MC 2.0 WR 55