Publicité
Les langues disponibles
Les langues disponibles
O P E R AT I O N
3. The radio will continue to scan all memory
locations and stop if an incoming
transmission is detected. The unit will
remain on that location for 10 seconds.
During that time you can:
a) Press and hold the TALK button and talk.
The radio will remain on that memory
location channel and return to Standby mode.
TALK button
b) Push the CHANNEL
CHANNEL SELECT
SELECT button up or
button
down to resume
scanning memory
locations.
c) Press the MODE
button to proceed to other functions.
If you do not press any button within
10 seconds, the radio will automatically
resume scanning memory locations.
Setting Dual Watch
Dual watch allows you to simultaneously
monitor any two channels/privacy codes
you select. To program Dual Watch:
1. Select the first channel and privacy code
you wish to monitor. (To review, see
pages 3-4.)
11
ENGLISH
2. Press the MODE button until the Dual
Watch icon flashes.
MODE button
3. Push the CHANNEL
CHANNEL SELECT
SELECT button up or
button
down to select the
second channel you
wish to monitor.
4. Press the MODE
button. The privacy code flashes.
MODE button
5. Push the CHANNEL SELECT button up or
down to select the second privacy code.
6. Press and release the LOCK button to store
the second channel/
LOCK
privacy code and
button
engage Dual Watch.
7. To terminate Dual
Watch and return to
normal Standby
mode, press and release the LOCK, TALK or
MODE button.
ENGLISH
Turning Roger Beep
Off and On
With Roger Beep turned on, your listener
will hear an audible tone when you release the
TALK button. To change Roger Beep mode:
1. Press the MODE button until the Roger
Beep icon flashes and the current setting
("on" or "off") is displayed.
MODE button
2. Push the CHANNEL SELECT button up or
down to turn Roger Beep on or off.
CHANNEL DOWN
CHANNEL UP
3. To enter the new setting you can press and
release the LOCK button, or press no
buttons for 15 seconds. Press the MODE
button to enter the new setting and
proceed to other functions.
MODE
LOCK button
button
O P E R AT I O N
Turning Keystroke Tones
Off and On
With Keystroke Tones turned on, your unit will
sound beeps each time you press a button or
change a setting. To change Keystroke Tones
mode:
1. Press the MODE button until the Keystroke
tones icon flashes and the current setting
("on" or "off") is displayed.
MODE button
2. Push the CHANNEL SELECT button up or
down to turn Keystroke Tones on or off.
CHANNEL DOWN
CHANNEL UP
3. To enter the new setting you can press and
release the LOCK button, or press no
buttons for 15 seconds. Press the MODE
button to enter the new setting and
proceed to other functions.
LOCK button
MODE
button
12
Publicité
