Cobra microTALK FRS 307 Guide D'utilisation page 5

O P E R AT I O N
Using VOX Mode
In VOX mode, your microTALK ® can be used
"hands-free," automatically transmitting when
you speak. To turn VOX mode on and off:
1. Press the MODE button until the VOX icon
flashes and the current setting ("on" or
"off") is displayed.
MODE
button
2. Push the CHANNEL SELECT button up or
down to turn VOX mode on or off.
CHANNEL
CHANNEL
DOWN
UP
3. Press and release the LOCK button to enter
the new setting, or press the MODE button
to enter the new setting and proceed to
other functions.
LOCK MODE
button button
7
ENGLISH
Setting the VOX
Sensitivity Level
You can set the VOX sensitivity level to fit the
volume of your voice and avoid transmissions
triggered by background noise. To set the
sensitivity:
1. Press the MODE button until the VOX
icon flashes and the number for the
current sensitivity level is displayed next
to the letter L (level 5 = most sensitive,
level 1 = least sensitive).
MODE
button
2. Push the CHANNEL SELECT button up or
down to change the setting.
CHANNEL
CHANNEL
DOWN
UP
3. Press and release the LOCK button to enter
the new setting, or press the MODE button
to enter the new setting and proceed to
other functions.
ENGLISH
Programming Memory
Locations
Your microTALK ® radio has 10 memory
locations (0-9) for storing your most
frequently used channels and privacy codes.
To program locations:
1. Push the MODE
button until the
MODE
Memory icon and
button
the memory
location flashes.
2. Select the memory
CHANNEL SELECT
location you wish to
button
change by pushing
the CHANNEL SELECT
button up or down.
3. Press and release the
MODE button again. The Memory icon and
the main channel number will flash.
MODE button
4. Select the main channel you wish to store by
pushing the CHANNEL SELECT button up or
down.
O P E R AT I O N
5. Press the MODE button again to store the
main channel in memory and move to
privacy code selection. The privacy code
number begins flashing and the Memory
icon continues to flash.
MODE button
6. Select the privacy code (0-38) you
wish to store by pushing the CHANNEL
SELECT button up or down.
7. Press the TALK button
to transmit on your TALK
button
selected channel and
privacy code, which
will be stored into
the memory location
you are using.
8. Press and release the LOCK button to
return to Standby mode at your new
memory location, or press and release the
MODE button to save the memory location
and proceed to other functions.
LOCK MODE
button button
8