Matrix PGT 3 in 1 Traduction De La Notice Originale page 61

A16
6
A17
4
A18
Press the primer (25) 10 times.
25
• Set the equipment down on a hard, level surface.
• Hold the equipment firmly and pull out the
starter cable (6) gently until you feel it begin to
resist. Then tug sharply on the starter cable. The
equipment should start. If the engine does not
start up, repeat again.
Important: Never allow the starter cable to snap
back. This may result in damage.
• Once the engine has started, move the choke
lever immediately to „
equipment to warm up for approx. 10 seconds.
CAUTION: Never place feet on the stem or kneel
on it.
Now press the release button (4) and then activate
the throttle lever (8) until the unit runs smoothly
and reaches full speed.
8
" and allow the
61