Troubleshooting - CERTIFIED 060-0181-8 Guide D'utilisation

TROUBLESHOOTING

WARNING: Before performing any maintenance or cleaning work, switch off the engine and
wait until the blade has come to a stop.
Caution!
Improper repairs can result in the product functioning unsafely. This endangers yourself
and your environment.
Faults which cannot be rectified with the aid of following table may be rectified by a specialist
company only (customer service centre).
Please be aware that any improper repairs will also invalidate the warranty and additional costs
may be incurred.
Use only genuine spare parts. Only these spare parts are designed and suitable for the product.
The use of other spare parts not only voids the warranty, you can also endanger yourself and your
environment.
Problem
Motor does not run
Motor power drops
Grass catcher is not filled
sufficiently
Wheel drive does not
function (if equipped)
Remedy
- Check mains connection cable and circuit breaker (fuse).
- Start on short grass or on an area which has already been
mowed.
- Clean discharge channel/housing (the mowing blade must
rotate freely).
- Correct the cutting height.
- Increase the cutting height.
- Clean discharge chute.
- Have mowing blade resharpened /replaced (customer
service centre).
- Correct the cutting height.
- Allow the lawn to dry.
- Have mowing blade resharpened /replaced (customer
service centre).
- Clean the grille on the grass catcher.
- Clean the discharge chute.
- Adjust the flexible cable.
- Check the drive wheels for damage.
23