Adjustment - CERTIFIED 060-0181-8 Guide D'utilisation

14 16
model no. 060-0181-8 model no. 054-8289-8
TROUBLESHOOTING

ADJUSTMENT

Problem
Setting the cutting height
As shown in Fig. 7.
The motor does not start.
CAUTION! When the motor has been
switched off, the blade continues
Blade cannot be removed.
running for several seconds therefore
Cutting is difficult.
do not touch the underside of the
mower until the blade has come to a
standstill!
If you want to change the cutting height,
place the adjusting lever (2) in the
desired position. (Fig. 7)
1. Push the handle to the outside of the
mower body.
2. Set the handle at the desired height.
I
contact us: 1-844-428-7277
Possible Causes
The tool is not connetced to
a power source.
Saw dust in the blade
clamp.
Saw blade is worn.
Solution
Connect the tool to a power
source.
Fig. 7
Clean the clamp slot with
a brush.
Replace the saw blade.