Quick R02 Mode D'installation Et D'emploi page 19

MAINTENANCE
The RRC radio receiver does not require particular maintenance. In order to ensure optimal operation of the re-
mote control, once a year verify cables and electrical connections.
TECHNICAL DATA
MODELS
INPUT CHARACTERISTICS
Power supply
Quiescent current
Absorption with 2 relays activated
OUTPUT CHARACTERISTICS
Relay number
Relay contact rating*
CHARACTERISTICS OF THE RECEIVER
Frequency
Modulation
Number of transmitters that
can be stored
Compliant with directive
GENERAL CHARACTERISTICS
Operating temperature
Dimensions (W x H x D)
Weight (with all relays installed)
* With two enabled relay, having a load of 15A each (30A total), the nominal operating time is 17 seconds and the idle time is 16 minutes.
With one enabled relay, having a load of 15A, the nominal operating time is 10 minutes and the idle time is 10 minutes.
QUICK ® RESERVES THE RIGHT TO MODIFY THE TECHNICAL CHARACTERISTICS OF THE EQUIPMENT AND THE CONTENTS OF THIS MANUAL WITHOUT PRIOR NOTICE.
RRC R02/12 - REV003A
MAINTENANCE - TECHNICAL DATA
R02 R04
2 4
300 g
R06 R08
10,5 ÷ 31 Vdc
25 mA
120 mA
6 8
15A
434.420 Mhz
FSK
50
2014/53/EU (RED)
from -15°C to +70°C
143 x 141,7 x 61,4 mm
370 g
EN
R10 R12
10 12
19