BaByliss PRO FX69ZE Mode D'emploi page 9

REGULAR - Resetting the blade
for regular use
Step 1
Before placing the blade into the
adjustment tool, use the screwdri-
ver provided to loosen the tension
screws, without removing them
completely from the blade holder.
Place the blade into the adjust-
ment tool in the side marked
Regular.
The tool will automatically push
the moving blade down to its
regular position.
Step 2.
Tighten the tension screws to hold
the blade in place.
Step 3.
Remove the blade from the adjust-
ment tool by gently pushing the
blade from the opposite side.
FEATURES
• Zero gap stainless steel T-blade
• Powerful DC motor
• 4 comb guides 3mm – 6 mm –
10mm – 13mm
• Lightweight, silent, low heat
• 3m professional power cord
• Including cleaning brush and
lubricating oil
• Worldwide voltage
9