Publicité
Les langues disponibles
Les langues disponibles
ZERO GAP
Step 1.
Before placing the blade into the
adjustment tool, use the screwdri-
ver provided to loosen the tension
screws, without removing them
completely from the blade holder.
Step 2.
Place the blade into the adjust-
ment tool in the side labelled 'Zero
Gap'.
Step 3.
Push the blade guide up as far as
the adjustment tool allows, so the
moving blade sits closely with the
top of the adjustment tool. The
blades will now be flush with each
other.
Step 4.
Using the screwdriver, tighten the
tension screws to hold the blade
in place.
Step 5.
Remove the blade from the ad-
justment tool by gently pushing
the blade from the opposite side.
8
Publicité
