Publicité
Les langues disponibles
Les langues disponibles
E
- 61.518 -
INSTALLATION AND MAINTENANCE MANUAL
2011 - GEB1102VT
6. filter
options :
- electrical auxiliary heating
- safety thermostat for electrical heating (SC.4914)
- remote control (SC.329)
execution 12 : wall model with casing - with foot
a standard model has following components :
1. chassis, with foot
2. heat exchanger / battery
3. motor-ventilatorgroup
4. outlet grille
can be mounted in the front or at the top
with controls
5. casing
6. filter
options :
- electrical auxiliary heating
- safety thermostat for electrical heating (SC.4914)
- remote control (SC.329)
- inside air intake grille
execution 13 : wall model with casing - with foot - air change over
box
a standard model has following components :
1. chassis, with foot
2. heat exchanger / battery
3. motor-ventilatorgroup
4. outlet grille
can be mounted in the front or at the top
with controls
5. casing
6. filter
7. air change over box
operated manually
for inside or outside iar
suction from the front or the rear
options :
- electrical auxiliary heating
- safety thermostat for electrical heating (SC.4914)
- remote control (SC.329)
- inside air intake grille
- damper (SC.4911)
- anti-freeze thermostat (SC.4912)
- fresh air intake grille
execution 21 : wall model for building in - suspended model
a standard model has following components :
1. chassis
with controls (mounted next to outlet opening)
2. heat exchanger / battery
3. motor-ventilatorgroup
6. filter
options :
- electrical auxiliary heating
- safety thermostat for electrical heating (SC.4914)
- remote control (SC.329)
- build in grille with frame
- flexible connection for connecting the fan coil unit and grille
- inside air intake grille with frame
FAN COIL UNITS
execution 22 : wall model for building in - with foot
a standard model has following components :
1. chassis, with foot
2. heat exchanger / battery
3. motor-ventilatorgroup
6. filter
options :
- electrical auxiliary heating
- safety thermostat for electrical heating (SC.4914)
- remote control (SC.329)
- build in grille with frame
- flexible connection for connecting the fan coil unit and grille
- inside air intake grille with frame
execution 23 : wall model for building in - with foot - air change
over box
a standard model has following components :
1. chassis, with foot
2. heat exchanger / battery
3. motor-ventilatorgroup
6. filter
7. air change over box
options :
- electrical auxiliary heating
- safety thermostat for electrical heating (SC.4914)
- remote control (SC.329)
- build in grille with frame
- flexible connection for connecting the fan coil unit and grille
- inside air intake grille with frame
- damper (SC.4911)
- anti-freeze thermostat (SC.4912)
- fresh air intake grille
execution 31 : ceiling model with casing
a standard model has following components :
1. chassis
2. heat exchanger / battery
3. motor-ventilatorgroup
4. outlet grille, mounted in the front
5. casing
6. filter
8. inside air intake grille
9. remote control
options :
- electrical auxiliary heating
- drain pan: necessary when with cooling battery
- safety thermostat for electrical heating (SC.4914)
execution 32 : ceiling model with casing - air change over box
through wall
a standard model has following components :
1. chassis
2. heat exchanger / battery
3. motor-ventilatorgroup
4. outlet grille, mounted in the front
with controls (mounted next to outlet opening)
with controls (mounted next to outlet opening)
operated manually
for inside or outside iar
suction from the front or the rear
when without cooling battery : can be mounted on
the bottom
Publicité
