Bodet Harmonys Trio Notice D'utilisation Et D'installation page 6

2.3 Factory configuration
1/ When the power is on, press the test button (until you hear a continuous «beep» ).
The default configuration is as follows :
- Name: BODET-MAC address (ex. (ex.:BODET-30AEA4C5BA80))
- IP configuration by DHCP
- Multicast synchronisation (broadcast)
- Synchronisation address: 239.192.54.1
- Default addresses for audio control : A=239.192.55.1, B=not filled
- Boost: disable
- Time display: Hour/Minute
- Mode 12/24h: 24h
- Volume: level 7
- Zone number: 1
- Display luminosity: 3
- Flash luminosity: 75%
- ECO mode: disabled
Port RJ45 Loudspeaker
LED display
connector
6
connector
Power supply indicator :
LED ON (green) = device powered on.
LED OFF = no power.
Network indicator :
LED flashing green fast = connection to the
network in progress.
LED flashing green slowly = device connected to
the network
LED flashing red slowly = loss of network
connection or failure to connect to the network.
Test button :
Pressing = emission of a melody + falsh + text
Pressing and holding when powering on = return
to factory configuration