4.5 System page
This page is divided into four sections as follows:
u
Information panel displaying software version and time since the equipment was powered on.
v
A warning message reminds you that once a password is set, a connection can only be
established with the clock's web interface by entering the correct password (max 16
characters). Enter a username and password in the fields provided. To save the new username
and password, click on Save. Authorized characters: A to Z, a to z, 0 to 9, ., - and _.
w
A warning message reminds you that rebooting the equipment will cause the network
connection to be lost until the clock has fully rebooted. The Reboot button reboots the product.
A warning message reminds you that rebooting the clock in factory configuration will erase
x
any settings you have made and may cause the equipment to lose its connection to the
network if there is no DHCP server. The Factory config.+Reboot button reboots the clock in
factory configuration.
16
u
v
w
x