Philips FC8138 Mode D'emploi page 15

Replacing the HEPA exhaust filter
Always unplug the appliance before you replace a filter.
Replace the HEPA exhaust filter every 12 months.
- To remove the old filter and place the new filter, follow the instructions
for removing and placing the filters in section 'Cleaning the HEPA
exhaust filter' in chapter 'Cleaning and maintenance'.
ordering dustbags
- Philips Classic s-bag ® synthetic dustbags are available under type
number FC8021.
- Philips Clinic s-bag ® high filtration synthetic dustbags are available
under type number FC8022.
- Philips Anti-odour s-bag ® synthetic dustbags are available under type
number FC8023.
- Reusable dustbags (some countries only) are available under code
number 4322 004 93370.
Note: Please visit www.s-bag.com for more information about the s-bag.
Ordering filters and accessories
- HEPA exhaust filters are available under type number FC8070.
storage
1 Switch off and unplug the appliance.
2 Press the cord rewind button to rewind the cord.
3 Put the appliance in upright position. To attach the nozzle to the
appliance, insert the ridge on the nozzle into the storage slot.
Note: To ensure stable storage of the telescopic tube, adjust the tube to the
shortest length.
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment.
English
15