Philips FC8138 Mode D'emploi page 14

English
14
replacement
The plug must be removed from the socket-outlet before cleaning or
maintaining the appliance.
Replacing the dustbag
- Replace the dustbag as soon as the dustbag-full indicator has changed
colour permanently, i.e. even when the nozzle is not placed on the
floor.
1 Switch off and unplug the appliance.
2 Pull the cover upwards to open it.
3 Lift the dustbag holder out of the appliance.
Make sure you hold the dustbag upright when you lift it out of the
appliance.
4 Pull at the cardboard tag to remove the full dustbag from the holder.
When you do this, the dustbag is sealed automatically.
,
5 Slide the cardboard front of the new dustbag into the two grooves of
the dustbag holder as far as possible.
6 Put the dustbag holder back into the vacuum cleaner.
Note: If no dustbag has been inserted, you cannot close the cover.
7 Push the cover downwards to close it.