Philips FC8138 Mode D'emploi page 13

Cleaning the motor protection filter
To maintain optimal performance, clean the motor protection filter at least
once a year.
1 Pull the cover upwards to open it.
2 Lift the dustbag holder out of the appliance.
Make sure you hold the dustbag upright when you lift it out of the
appliance.
3 Pull the filter holder with the motor protection filter out of the
appliance.
4 Take the motor protection filter out of the holder. Shake the motor
protection filter over a dustbin to clean it.
5 Put the filter in the filter holder and slide the filter holder back into
the appliance.
6 Put the dustbag holder back into the appliance.
Cleaning the mini turbo brush (specific types only)
To clean the brush inside the mini turbo brush, follow the steps below.
1 Rotate the brush inside the mini turbo brush until the cutting groove
faces you. Use a pair of scissors to cut the hairs, threads etc that
have collected around the brush.
2 Remove fluff, hairs and other dirt from the brush.
English
13