Adjusting The Sound Characteristics; Quickly Attenuating The Sound; Changing The Sound And Display Settings; Menu - Sony CDX-CA700X Mode D'emploi

Adjusting the sound
characteristics
You can adjust the bass, treble, balance and fader.
1
Select the item you want to adjust by
pressing (SOUND) repeatedly.
Each time you press (SOUND), the item
changes as follows:
BAS (bass) t TRE (treble) t
BAL (left-right) t FAD (front-rear)
2
Adjust the selected item by pressing
either side of (SEEK).
When adjusting with the rotary commander,
press (SOUND) and rotate the VOL control.
Note
Adjust within 3 seconds after selecting the item.
Quickly attenuating the
sound
(With the rotary commander or the card
remote commander)
Press (ATT) on the rotary commander
or card remote commander.
After "ATT-ON" momentarily appears,
"ATT" appears in the display.
To restore the previous volume level, press
(ATT) again.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).
20
Changing the sound and
display settings

— Menu

The following items can be set:
SET (Set Up)
• CLOCK (page 9)
• CT (Clock Time) (page 18)
• BEEP — to turn the beeps on or off.
• RM (Rotary Commander) — to change the
operative direction of the controls of the rotary
commander.
– Select "NORM" to use the rotary commander
at the factory-set position.
– Select "REV" when you mount the rotary
commander on the right side of the steering
column.
DSPL (Display)
• D.INFO (Dual Information) — to display the
clock and the play mode at the same time (ON).
• AMBER/GREEN — to change the
illumination colour to amber or green (CDX-
CA700 only).
• M.DSPL (Motion Display) — to select the
Motion Display mode from "1," "2," and
"OFF."
– Select "1" to show decoration patterns in the
display and activate Demo display.
– Select "2" to show decoration patterns in the
display and deactivate Demo display.
– Select "OFF" to deactivate the Motion
Display.
• A.SCRL (Auto Scroll)
– Select "ON" to scroll all automatically
displayed names exceeding 8 characters.
– When A.SCRL is set to off and the disc/track
name is changed, the disc/track name does
not scroll.