Cleaning And Maintenance; Front And Panel Commands; Inside Space; Troubleshooting - Fulgor Milano F4DWD24S1 Instructions Pour L'installation Et L'utilisation

EN

Cleaning and Maintenance

Generally speaking, cleaning is the only form of maintenance
necessary.
ATTENTION
Before you begin cleaning, disconnect the appliance from
the outlet. Disconnect the cord from the outlet and turn off
the appliance.
WARNING
Do not use harsh detergents or abrasive products and/or
scrubbing pads and sponges and sharp objects as they
can stain and damage the appearance of the appliance.
Never use a vacuum cleaner on the internal parts of the
appliance.

Front and panel commands

The use of a moist cloth is sufficient when cleaning the
appliance. In the event the appliance requires further
cleaning, add drops of detergent in the water. Dry the
appliance with a dry cloth. The steel front of the appliance
can be cleaned with products specifically designed for steel.
Such products prevent the formation of dirt on the surface of
the drawer. Apply a minimal amount of the product on a soft
and apply it to the surface of the appliance.

Inside space

To clean the inside space use a moist cloth. In the event the
appliance requires further cleaning add drops of detergent
to the water. Dry the surface with a dry cloth. Make sure to
avoid water draining into the ventilation holes. Only use the
appliance after the drawers are dry completely.
6

Troubleshooting

ATTENTION
Repairs must only be performed by specialized and
qualified personnel. Any repair work not performed
by professional personnel may cause damage to the
appliance for which the manufacturer will not be liable.
The following problems can be fixed by the consumer
without the assistance of the Service Department.
The drawer is not hot enough. Make sure that:
• The appliance is turned on;
• The correct temperature has been set;
• The opening of the ventilation fan is not blocked by plates
or other large obstructions;
• The drawers have had sufficient time to heat up.
The drawer is not hot at all. Make sure that:
• You hear the fan running;
• If the fan is turned on this means that the heating system
is working;
• If the fan does not work this means it is defective;
• The circuit fuse is blown.
INSTALLATION INSTRUCTIONS:

Appliance installation

IMPORTANT: Save these instructions for the local electrical
inspector use.
INSTALLER: Please leave this manual with owner for future
reference.
OWNER: Please keep this manual for future reference.
WARNING
If the information in this manual is not followed exactly,
a fire or explosion may result causing property damage,
personal injury or death.
Please read these instructions
CAREFULLY. They will save you time and effort and help to
ensure optimum drawer performance.
Be sure to observe all WARNINGS. These installation
instructions are intended for use by a qualified installer.
COMPLETELY AND