Topcom SOLOGIC B935 Manuel D'utilisateur page 27

Tone is good, but
cannot make any
connection
Not possible to transfer
a call on PABX
Telephone does not
react to pressing the
keys
17 Technical characteristics
Standard:
Frequency range:
Number of channels:
Modulation:
Speech coding:
Emission power:
Range:
Base power supply:
Handset Batteries:
Handset standby time:
Handset talk time:
Charging time:
Dialing mode
Normal conditions of use:
Flash time:
18 Topcom Warranty
18.1 Warranty period
The Topcom units have a 24-month warranty period. The warranty period starts on the day
the new unit is purchased. There is no warranty on standard or rechargeable batteries (AA/
AAA type).
Consumables or defects causing a negligible effect on operation or value of the equipment
are not covered.
The warranty has to be proven by presentation of the original or copy of the purchase receipt,
on which the date of purchase and the unit-model are indicated.
18.2 Warranty handling
A faulty unit needs to be returned to a Topcom service centre including a valid purchase note.
If the unit develops a fault during the warranty period, Topcom or its officially appointed
service center will repair any defects caused by material or manufacturing faults free of
charge, by either repairing or exchanging the faulty units or parts of the faulty units. In case
of replacement, colour and model can be different from the original purchased unit.
Sologic B935
The dialing mode is wrong
The Flash Time is too short
Manipulation error
DECT(Digital Enhanced Cordless Telecommunications)
GAP ( Generic Access Profile )
1880 MHz to 1900 MHz
120 duplex channels
GFSK
32 kbit/s
10 mW ( average power per channel )
300 m in open space / 50 m maximum in-house
In: 230V AC / 50Hz - Out: 7,5V DC / 300mA
3 rechargeable batteries AAA, NiMh 600mAh
100 hours in standby
10 hours
16 hours
Tone / Pulse
+5 °C to +45 °C
100ms or 300ms
Adjust the dialing mode (pulse/
tone)
Change the Flash Time
Remove the batteries for at
least 1 minute and put them
back in place
Sologic B935
27