Publicité
Les langues disponibles
Les langues disponibles
EN
Before using this unit, please read these instructions completely.
PRODUCT OUTLINE:
Open doors stand for a considerable amount of the energy loss in a
building. A correctly installed AIR CURTAIN can reduce the heat loss
through the door as much as 90%. Except for the obvious energy savings
in money, the AIR CURTAINS prevents cold draught that can cause
absence due to illness and also allows shops to keep their doors open in
winter time which has proven to attract more customers. AIR CURTAINS
give the slogan " a warm welcome " a true meaning.
CONDITIONS OF USE:
Please DO NOT install the unit under following conditions:
1. Do not operate ambient temperature over 50
2. A relative humidity over 95% at room temperature and steamy area.
3. Contains of oily smoke.
4. Materials or gases may cause explosion.
5. Nearly corrosive gases.
6. Locate in where may be sprinkle with water.
DIAGRAM:
[ Dimension : mm ]
BODY LENGTH
900
1000
1200
1500
INSTALLATION:
1.
Unscrew the mounting plate and take it off.
2.
Drill a hole as the instruction. Then put into the bolt and fix it with
cement.
(Fig.3)
3.
Hanging on the mounting plate and ensure fix it.
4.
Installing the machine onto the mounting plate and ensure the safety,
than fix it tighten with screws.
A
L1
900
270
1000
320
1200
420
1500
570
(Fig.5)
6
°
°
C or below -10
C.
L2
300
300
300
300
(Fig. 1 Fig.2)
(Fig.4)
Publicité
