Cleaning; Fault/Remedy - ADE Linette Mode D'emploi

Cleaning

Cleaning
NOTE on material damage
− Do not immerse the scale in water or other liquids.
− Do not under any circumstances use harsh, scouring or abrasive
cleaning agents or the like to clean the scale. Otherwise, the surface
could be scratched.
− Wipe the scale as needed with a slightly damp soft cloth.
− Disinfect the weighing surface from time to time using a suitable disinfecting
agent (available at specialist retailers and pharmacies).

Fault/Remedy

Fault
No function
The scale appears to
be displaying wrong
weighing results
"Err" is shown on the display
"Lo" is shown on the display
"C" is shown on the display
20
Possible cause
‚ Are the batteries empty or inserted the wrong
way around?
‚ Is the scale located on a firm, even surface?
‚ Is a device that can cause electromagnetic
disturbances located in the vicinity of the scale?
‚ Remove the batteries from the scale and wait a
moment. Reinsert the battery.
‚ The maximum capacity of the scale (180 kg) has
been exceeded.
‚ The batteries are empty (see "Inserting/
changing batteries").
‚ The weighing/measurement process was
faulty: The scales are not standing stably or you
are not standing still on the weighing surface
during weighing. Repeat the process.
Bathroom Scales BE 1906 | BE 1907