Stopping The Alarm Signal, Snooze Function; Selecting The Temperature Unit °C/°F; Displaying The Maximum/Minimum Values; Deleting The Maximum/Minimum Values - Eurochron EFWS 300 Mode D'emploi

d) Stopping the Alarm Signal, Snooze Function
The alarm signal is put out at the set alarm time (duration about 60 seconds); the
display lighting is activated for about 5 seconds.
Press the "SNOOZE/LIGHT" button to interrupt the alarm signal for 5 minutes and
then start it again (snooze function).
To terminate the alarm signal or snooze function, briefly press the button "ALM" (8).
e) Selecting the Temperature Unit °C/°F
Briefly press the button "ADJUST" (7) in the normal display (not in setting mode) to
switch between the temperature units "°C" (degree Celsius) and "°F" (degree Fah-
renheit).
f) Displaying the Maximum/Minimum Values
—
Briefly press the button "MAX/MIN" (6) to display the maximum values for indoor
and outdoor temperatures.
The display indicates "MAX".
—
Briefly press the button "MAX/MIN" (6) again to display the minimum values for
indoor and outdoor temperatures.
The display indicates "MIN".
—
Press the button "MAX/MIN" (6) again to return to normal display (or do not press
any button for 30 seconds).
g) Deleting the Maximum/Minimum Values
Press and hold the "MAX/MIN" (6) button for about 3 seconds until a brief signal can
be heard.
The values are then reset.
The new maximum and minimum values are the current measured values until
they are changed again.
37