2. INTENDED USE
The product consists of a basis station for displaying the measured data and an
outdoor sensor to transfer the measured temperature data wirelessly to the basis
station.
The time can be automatically set by DCF time signal. It can also be set manually,
however (e.g. in case of reception problems).
A list of all features and characteristics of the product is presented in
chapter 5.
The product is intended for private use only and not suited for medical purposes or
informing the public.
The contents of this product are not a toy, it contains fragile and swallowable glass
parts, small parts and also batteries. It should be kept out of the reach of children!
Keep all components out of the reach of children.
The product is battery-operated.
Any use other than that described above may damage the product. There are also
additional risks.
Read these operating instructions thoroughly and carefully, they contain a lot of
important information for installation, operation and handling. Observe all safety
instructions!
3. SCOPE OF DELIVERY
—
Basis station
—
Stand for basis station
—
Outdoor sensor for temperature measurement
—
Operating instructions
4. EXPLANATION OF SYMBOLS
An exclamation mark in a triangle indicates important instructions in this
operating manual which must be observed.
The hand symbol indicates special advice and operating information.
25