Cavist 224 Manuel D'utilisation page 7

o If the unit is switched off or unplugged, you must allow at least 5 minutes before restarting the
appliance or reconnecting it to your mains supply.
Switching on the appliance and setting the temperature
To switch the appliance on, press the button
press and hold the power button for 5 seconds.
o When you press the TEMPERATURE SET BUTTONS
will indicate the factory preset temperature.
o Press the TEMPERATURE SET BUTTONS
1°C or 1°F until the temperature you want.
To see the set temperature at any time, touch the buttons "UP BUTTON
", set temperatures temporarily flash on the display for about 5 seconds.
WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other
than those recommended by the manufacturer.
IMPORTANT: When the temperature is changed, the compressor works harder to reach the required
temperature. And the compressor will work slowly and even stop working when the set temperature
is reached.
Loading the wine cooler
IMPORTANT: Your appliance is ideally suited to store 0.75 litre Bordeaux style wine bottles.
Whilst it can store larger bottles, you must make sure that they do not prevent the door from shutting
properly.
o Always check that you can close the door
without it fouling on a wine bottle, before
shutting it.
o When loading several bottles of wine at
once, it will take longer for the appliance to cool
the individual bottles.
o As many bottles may differ in size and
dimensions, the actual number of bottles you
are able to store may vary.
o The maximum storage number is based on
standard 0.75 litre Bordeaux style wine bottles.
and hold 5 seconds, turn the appliance off again,
or for the first time, the LED display
or once. The display will increase or descrease
" or "DOWN BOTTON