Bushnell TROPHY CAM HD AGGRESSOR Notice D'utilisation page 9

Inserting the SD Card
The Trophy Cam HD Aggressor has 32MB of internal memory, which can
hold only about 18 photos (@ 8MP resolution). This is handy for testing
and getting familiar with the camera, but you will no doubt want to leave
the camera unattended for longer than a day, so using an SD card is
recommended for all models. Insert the SD card (with the camera's power
switch in the OFF position) before beginning to operate the camera. Don't
insert or remove the SD card when the power switch is in the ON position.
The Trophy Cam HD Aggressor uses a standard SD (Secure Digital)
memory card to save photos (in .jpg format) and/or videos (in .avi format).
SD and SDHC (High Capacity) cards up to a maximum 32GB capacity are
supported. Using high speed SD cards (SanDisk
higher) is recommended if you will use the 1280x720 or 1920x1080 HD
video settings. Before inserting the SD card into the card slot after opening
the camera's front cover, please make sure that the write-protect switch
on the side of the card is "off" (NOT in the "Lock" position). The following
describes how to insert and remove the SD card:
• Insert the SD card into the card slot with its label side upwards (see
below). A "click" sound indicates that the card is installed successfully.
If the wrong side of the card is facing up, you will not be able to insert
it without force-there is only one correct way to insert cards. If the SD
card is not installed correctly, the device will not display an SD card icon
on the LCD in SETUP mode (the SD card icon displayed after switching
to SETUP mode will have a "lock" symbol inside it in it if the card is locked).
Formatting the SD card by using the Trophy Cam HD Aggressor's
"Format" parameter before using it for the first time is recommended,
especially when a card has been used in other devices (see pg. 23,
"Format" for details).
• To take out the SD card, just gently
push in the card (do not try to pull
it out without pushing in first). The
card is released from the slot and
ready to be removed when you hear
the click. WARNING: Be sure the camera's power
is switched OFF before inserting or removing SD cards
or batteries.
SDHC rated class 6 or
®
9