Description Of Your Ph First; Identification Of Parts - Zodiac O'Clair pH First Notice De Montage Et D'utilisation

1

Description of your pH First

6
8
22
Congratulations, you are now the owner of a O'Clair pH First, which allows
you to regulate the pH of your pool simply and easily.
The pH First measures the pH value between 0.0 (acidic) and 14.0 (alka-
line) using a pH sensor on the filtration system, which constantly analyzes
the water in your pool.
Depending on the value measured, the pH First dosing pump injects the
amount of product needed to maintain the balance of the water in the pool.
The pH First will function with either acid or alkaline dosing.
1.1.

Identification of parts

The pack contains the items shown and required to install your pH First:
2
3
7
9
10 11
pH First controller
1
Wall bracket
2
2 x Stainless-steel screws and plugs (Ø = 6 mm)
3
Polyethylene injection tube (5 metres)
4
Intake pipe with 2- metre PVC tube and 3 - metre cable
5
FPM lipped injection flap valve (3/8'')
6
pH Sensor with 5- metre shielded cable
7
Injection flap valve reducer
8
Sensor holder, model PSS3 (1/2")
9
Collar for fixing the injection valve to DN 50 mm pipe
10
Collar for fixing the injection flap valve on tube DN 50 mm
11
pH calibration fluid kit
12
1
5
12
4