Use; Descripti On Of The Ei² - Gensalt Oe User Interface; Descripti On Of The Ei² Expert User Interface - Zodiac Ei2 GenSalt OE Notice D'installation Et D'utilisation Succincte

3. Use

3.1 Descripti on of the Ei² - GenSalt OE user interface
3.2 Descripti on of the Ei² Expert user interface
If the language displayed on the screen when the Ei² Expert is fi rst switched on is not appropriate, see "3.2.6
"Internal setti ngs" menu"
To increase or reduce chlorine producti on by pressing and releasing:
- To acti vate/deacti vate chlorine producti on by pressing and
releasing.
- To switch off the appliance by pressing and holding for 5 seconds.
- To switch on the appliance by pressing and releasing.
Red indicator showing the absence of fl ow and/or presence of air in
FLOW
the cell.
Orange indicator showing a water conducti vity problem (not enough
SALT
salt, water too cold, etc.).
Only if a compati ble electric roller shutt er is connected to the chlorinator:
Automati c acti vati on
- The fl ashing LED indicates that LOW mode was automati cally
of LOW mode
acti vated
(closed shutt er)
Chlorine producti on is reduced to the default value of 20%.
- LOW mode is automati cally deacti vated when the shutt er is opened.
==>
LOW mode (0% or 20%). The default setti ng is 20%.
- Close the shutt er then press and hold to adjust to 0% or 20%.
==> To confi gure
chlorine producti on
for LOW mode
(closed shutt er)
Press and hold
- If chlorinati on is set to 0%, LOW mode will keep the
0% setti ng when the shutt er is closed. The confi gurati on
or
is
- To exit the user menu or the internal setti ngs menu.
- To deacti vate BOOST mode or LOW mode.
- From the home screen: to increase or decrease chlorine producti on.
- In the user menu: to change values when a choice is proposed (fl ashing
characters).
- Press simultaneously for 5 seconds: to access the internal setti ngs menu.
- To access the user menu and browse the setti ngs (with successive
presses)
- To acti vate/deacti vate chlorine producti on by pressing and releasing.
- To switch off the appliance by pressing and holding
- To switch on the appliance by pressing and releasing
- To acti vate BOOST mode
and
- To acti vate "LOW" mode manually
and
20%
40%
when the electric
Chlorine producti on
Desired producti on
at 20% (LED on steady)
20%
memorised for when
100%
60% 80%
roller shutt er was
can be confi gured
Desired producti on
at 0%
the shutt er is next
EN
closed.
for
closed.
9