Annex: Insertable Tools; Maintenance And Environmental Protection - Meister KB135M Traduction Du Manuel D'utilisation Original

• The hook (3) allows the hand-held
rotary multi tool to be hung whilst
using a flexible shaft (not included in
delivery) or is used to store the tool.
• If you do not need the hook (3), fold it
back into its original position so that
it is not in the way when you use the
hand-held rotary multi tool.
10 – Annex: Insertable tools
Cutting­off disks (12) and sanding
sheets (14) (Fig. 5)
For use in model-building and
electronics (motherboards).
To insert, use the clamping shaft (13)
with screw. Loosening and tightening of
the screw with the universal wrench (9).
Grinding cylinder (Fig. 6)
For fine grinding or sanding work on
rounded or small surfaces.
Push the sanding cylinder (16) onto
the clamping mandrel for the cylinder
grinder (15). When the fixing screw is
turned clockwise, the rubber bead is
spread apart and holds the sanding
cylinder in position.
Point grinders (11) (Fig. 7)
For sharpening cutting tools and for
removing sharp edges from metal and
plastics.
Traces of wear on the grinders can be
compensated by using the grinding
block (14). This improves the concentric
running of the tool.
58
5400620-Hand-Schleifmaschine-man.indd 58 5400620-Hand-Schleifmaschine-man.indd 58
HSS drills (17) (Fig. 8)
For drilling small holes in watchmaking
and model making.
Metal brushes (Fig. 9)
For cleaning metals and stone
Diamond grinders (18) (Fig. 10)
For grinding and engraving hard materials
such as glass, ceramic, porcelain and
plastics. Diamond grinders suitable for
engraving and chasing glass.
Milling points (19) (Fig. 10)
For processing metals and plastics
ATTENTION! Besides the tools
supplied with the machine, a
wide variety of additional tools in
many sizes can also be purchased.
11 – Maintenance and
environmental
protection
Replacing the carbon brushes
If the performance of the hand-held
rotary multi tool deteriorates, the carbon
brushes need to be replaced.
ATTENTION! Carbon brushes
must always be replaced in pairs
by a specialist!
ATTENTION! Disconnect the
machine from the mains prior to
removing any coverings of electrical
parts!
19.10.20 13:50 19.10.20 13:50