POOL Autosalt Manuel Utilisateur page 50

SECURITY Rx
OK
CAREFUL EMPTY
TIN
OK
Salt sensor « ??? » or pH
« ???"
Any calibration from sensor
is validated.
pH « ???" sensor
Any calibration from pH
probe is validated
AUTOSALT®/POOLSQUAD®/POOLSQUAD® AMPERO/PRO - PAPI004082 – FR/EN/ES/DE - Rev.03.16
Chlorination STOP
pH Regulation ON
Chlorination ON
pH Regulation STOP
Chlorination STOP
pH Regulation STOP
Chlorination STOP
pH Regulation STOP
Only POOLSQUAD Pro
The addition of Chemical products such as flocculating agents, anti-
algae or others cleaning products can alter ORP probe reading. You
have to wait sometimes several weeks before these effects
disappeared.
Beforehand, check proper functioning of ORP probe with a manual
calibration.
If you have the empty tin option on your device.
Detection of liquid lack in pH regulation tin.
Ensure that tin of corrective solution doesn't be empty.
Calibrate salt sensor.
If sensor is not calibrated, change it and you have to do a calibration
again.
Calibration successfully pH probe (see §6.2).
24