Monacor PA-2460CD Mode D'emploi page 7

All operating elements and connections de -
scribed can be found on the fold-out page 3.
1 Operating Elements
and Connections
1.1 Front panel and remote control
1 Volume control LEVEL
2 Receiver for the remote control signals
3 Button PROGRAM to compile and replay an
individual title sequence
( chapter 5.9)
4 Button CLEAR to delete a programmed title
sequence or to switch off the random replay
5 Button FOLDER to select another folder in
MP3 mode
6 Button TIME to shortly indicate the number of
titles on the CD and the total playing time of
the CD on the display
7 Buttons DISC and to select the pre -
vious CD or the next CD in the magazine
8 Button to interrupt and continue the replay
9 Buttons and ( T-DN and
for title selection
button to select the next title
button to go to the beginning of the title
currently playing. Each time the button is
pressed, the unit goes back one title.
10 Button to stop the replay
11 Button POWER to switch between operation
and stand-by
12 LED STAND-BY: lights up when the unit is in
stand-by mode
13 Sliding door for the CD magazine compart-
ment
14 Button RANDOM (RDM)* for random replay
and for replay of the first title of each CD in
the magazine
1 st pressing of button: replay of the current
CD at random title order,
indication RANDOM
2 nd pressing of button: replay of the first title
of each CD in the magazine,
indication RANDOM DISC
3 rd pressing of button: function deactivated
15 Button REPEAT (RPT)* for the repeat func-
tions
1 st pressing of button: repeat of the title play-
ing, indication REPEAT 1
2 nd pressing of button: repeat of the CD play-
ing, indication REPEAT DISC
3 rd pressing of button: function deactivated
16 Button INTRO (SCN)* to shortly replay the
beginning of each title of the CD currently
* Lettering on the remote control
playing for 10 s
To stop the function, press the button
17 Button MUTE to interrupt and continue the
replay
18 Numerical keys for direct selection of titles
Examples:
Title No. Buttons
3 0, 3
10 1, 0
99 9, 9
19 Display, for details see fig. 2
a indication MUTE when the replay has been
interrupted with the button MUTE (17)
b replay symbol
c pause symbol
d magazine indication
e indication REPEAT 1 when the title cur-
rently playing is repeated or
indication REPEAT DISC when all titles of
the CD are repeated
f indication PROGRAM when an individual
title sequence is programmed or replayed
g indication RANDOM when the titles of the
CD are replayed in a random order;
additional indication DISC when the first
T-UP)*
title only of each CD in the magazine is
replayed
h indication INTRO when the beginning of
each title of a CD is replayed for 10 sec-
onds
I indication of the title number
j indication of the time already played of a
title
20 Buttons and
forward
To start fast forward, shortly press the button
, to start fast reverse, shortly press the
button . To stop fast forward or reverse,
press the button
21 Button EJECT to eject the CD magazine
22 CD magazine
23 Six handles to pull out the individual CD trays
1.2 Rear panel
24 Mains jack for connection to a socket (230 V~ /
50 Hz) via the supplied mains cable
25 Screw terminals DC INPUT for an emergency
power supply (24 V )
26 Coaxial digital output (S / PDIF)
27 Optical digital output
28 Stereo output via RCA jacks
29 Stereo output via XLR connections
30 Mono output via XLR connection
31 RS-232 interface for remote control of the
unit via a computer (
2 Safety Notes
(8)
The unit corresponds to all relevant directives of
the EU and is therefore marked with
WARNING This unit uses dangerous mains
Also observe the following items in any case:
G
G
G
G
G
G
for fast reverse and fast
G
(8).
chapter 6)
voltage. Leave servicing to skilled
personnel only. Inexpert handling
or modification of the unit may
cause an electric shock hazard.
The unit is designed for indoor use only. Pro-
tect it against dripping water and splash water,
high air humidity and heat (admissible ambi-
ent temperature range 0 – 40 °C).
Do not place any vessels filled with liquid, e. g.
drinking glasses, on the unit.
Do not set the unit into operation and immedi-
ately disconnect the mains plug from the
mains socket if:
1. there is visible damage to the unit or mains
cable,
2. a defect might have occurred after a drop or
similar accident,
3. there are malfunctions.
The unit must in any case be repaired by
skilled personnel.
Never pull the mains plug out of the mains
socket by means of the mains cable.
For cleaning only use a dry, soft cloth, never
use chemicals or water.
No guarantee claims for the unit and no liabil-
ity for any resulting personal damage or mate-
rial damage will be accepted if the unit is used
for other purposes than originally intended, if it
is not correctly connected or operated, or not
repaired in an expert way.
Important for U. K. Customers!
The wires in this mains lead are coloured in
accordance with the following code:
green/yellow = earth
blue = neutral
brown = live
As the colours of the wires in the mains lead of
this appliance may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:
1. The wire which is coloured green and yel-
low must be connected to the terminal in the
plug which is marked with the letter E or by
the earth symbol , or coloured green or
green and yellow.
2. The wire which is coloured blue must be
connected to the terminal which is marked
with the letter N or coloured black.
3. The wire which is coloured brown must be
connected to the terminal which is marked
with the letter L or coloured red.
Warning – This appliance must be earthed.
If the unit is to be put out of operation
definitively, take it to a local recycling
plant for a disposal which will not be
harmful to the environment.
GB
.
7